- Overview
- Product characteristics
- Product Description
- Product Parameters
- Product Size
- Attention
- Product application
- Our Advantages
- Packaging & Shipping
Basic Info.
Model NO.
HFS-WL1
Thread Type
PT
Wiring Type
Two-Wire
Measuring Medium
Pressure
IP Rating
IP67
Certification
CE
Customized
Customized
Precision
0.03%F.S
Output Type
Electric Signal
Working Force
5kg-500kg
Supply Voltage
12V
Transport Package
Package
Specification
silver
Trademark
ZEIHOU
Origin
China
Product Description
The sensor adopts a spoke structure and utilizes the principle of shear stress
It has the characteristics of low appearance, anti bias load, high accuracy, and good strength.
Suitable for various industrial automation measurement and control systems such as electronic scales, cement batching silos, mixers, material
mechanics testing machines, etc.
| 1. The company's products are special customized products |
| 2. The price of this product is for reference only |
| 3. To purchase products, contact customer service to provide specific parameter selection |
| Rated load: 100kg~500t | Sensitivity: 2.0 ± 0.05 mVN |
| Nonlinear. : ± 0.05~+0.19%F*S | Lag error: ± 0.05%F*S |
| Repeatability error: ± 0.05%F*S | Creep: ± 0.05%F*S |
| Zero point temperature coefficient: ± 0.05 % F*S/10 ºC | Sensitivity temperature coefficient: ± 0.05 % F*S/10ºC |
| Input resistance: 750 ± 30 Ω or 1.45K±50Ω | Output resistance: 700 ± 5 Ω or 1.4K±50Ω |
| Operating temperature range: -20°C~+70°C | Safe overload: 150% F*S |
| Insulation resistance: ≥2000MΩ | Excitation voltage: 5V~12V |
| Material: Stainless steel | Cable: φ5X 3M |
- Prohibit measuring media that are incompatible with the transmitter material
- Ensure that the power supply voltage meets the product requirements and wire according to the instructions
- Install the transmitter in a ventilated and dry place to avoid direct exposure to strong light and rain
- Pay attention to using snake skin pipes or iron pipes to protect the outgoing cables, or raise the cable rack
- It is recommended to power on for at least 10 minutes to achieve optimal product performance
- When disassembling the transmitter, ensure that the pressure source is turned off to prevent the medium from spraying out
- This product is not explosion-proof and can cause major accidents when used in explosion-proof areas
