Lia-Mv-150-S Single Phase BNC Interface End Locking Amplifier Module Lock-in Amplifier

Looking for a high-quality single-phase BNC interface locking amplifier module? Look no further than our Lia-Mv-150-S. As a factory, we ensure exceptional performance and reliability.
Request a Quote

PRODUCTS DETAILS

Basic Info.

Model NO.
LIA-MV-150-S
Trademark
LONROY
Origin
China
HS Code
9024800000
Production Capacity
200pieces/Month

Product Description

LIA-MV-150-S Single phase BNC interface end locking amplifier module lock-in amplifier
LIA-MV-150 phase-locked amplifier module has unique characteristics :1, current and voltage input :2, working frequency up to 45kHz 3, adjustable sensitivity, time constant and phase; 4, local and remote gain control 5, tight EMI-shidlded box.

LIA-MV-150-S Single phase BNC interface end locking amplifier module lock-in amplifier
The LIA-MV-150 FEMTO phase-locked amplifier has two ways of programming amplifier Settings, such as phase, gain, and time constant control via a switch directly in the amplifier module or externally using a standard digital 1/0 computer board. The variable operating frequency is determined by an external reference signal, such as the synchronization signal of a chopper or the modulation signal of a laser. Current inputs can be well adapted to amplifier signals from high impedance sources, such as diodes and PMTs that can be used to measure low impedance sources like pyros or coils during voltage output.
 

Model

LIA-MV-150-S Standard

LIA-MV-150-D True-Differential Input
Voltage Input BNC connector Lemo® connector
Single-ended True-differential
Instrumentation amplifier Instrumentation amplifier
Noise 12 nV/√Hz Noise 12 nV/√Hz
Current Input BNC connector Lemo® connector
Transimpedance amplifier, gain 1 kV/A Transimpedance amplifier, gain 1 kV/A
Noise 4 pA/√Hz Noise 4 pA/√Hz
Sensitivity
(Full Scale)
Voltage: 3 µV to 100 mV, switchable in 1-3-10
Current: 3 nA to 100 µA, switchable in 1-3-10
Working Frequency 10 Hz - 45 kHz
Reference Input ±100 mV to ±5 V, switchable to TTL
Phase Adjustable 0° - 360° (8-bit resolution),
Temperature drift <0,01°/K
Demodulator 50 dB max. dynamic reserve
Time Constants 3 ms to 10 s, switchable in 1-3-10, slope switchable 6 dB or 12 dB/octave
Output X [R · cos(angle)], ±10 V full scale, short-circuit protected
Digital Control 16 TTL, CMOS, opto-isolated 8 Bits phase, 4 Bits time constant, 4 Bits sensitivity
Power Supply ±15 V, 100 mA typ.
Case 170 x 60 x 30 mm (L x W x H), Weight 370 g

LIA-MV-150-S Single phase BNC interface end locking amplifier module lock-in amplifier
Power supply ± 15 V is accessed through a 3-pin Lemo socket. The device will provide a fitting connector. The PS-15 can be used with a power supply.

Application :1, spectroscopy 2, laser stabilization 3, cold light, fluorescence, phosphorescent measurement 4, light scattering measurement 5, photoelectric quality control 6, industrial integration and scientific metrology 7, OEM system.
Lia-Mv-150-S Single Phase BNC Interface End Locking Amplifier Module Lock-in Amplifier Lia-Mv-150-S Single Phase BNC Interface End Locking Amplifier Module Lock-in Amplifier Lia-Mv-150-S Single Phase BNC Interface End Locking Amplifier Module Lock-in Amplifier Lia-Mv-150-S Single Phase BNC Interface End Locking Amplifier Module Lock-in Amplifier Lia-Mv-150-S Single Phase BNC Interface End Locking Amplifier Module Lock-in Amplifier Lia-Mv-150-S Single Phase BNC Interface End Locking Amplifier Module Lock-in Amplifier

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours